| |
|
Hitachi 726101 12-Inch 90 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor
Hitachi
Hitachi
Used on Big Trim Job
Bought this blade last month for big trim job. 1200' of (6"base-all bevel cuts) and 960' of custom casing and sills. Cut like butter from beginning to end of job. Never a chip, splinter or ragged end. Never sanded a single joint! This blade delivers.
|
|
|
|
|
|
| |
|
Freud LU88R009 9-Inch 54 Tooth ATB Thin Kerf Crosscutting and Ripping Saw Blade with 5/8-Inch Arbor and ...
Freud
Freud
Great Blade
We have an OLD dewalt radial arm saw that is underpowered. We read that this blade is specifically designed for underpowered saws. It is thinner and has a narrower kerf which means it has less wood to remove to make a cut. We read about this in a magazine that gave ...
|
|
|
|
|
|
| |
|
DeWalt DW3128P5 Series 20 12-Inch 80 Tooth & 12-inch 32T ATB Thin Kerf Crosscutting Miter Saw Blade with ...
DEWALT
DEWALT
DeWalt DW3218P5 12" Blade Combo Pack
Just right for clean cuts. NOT for use on laminate flooring.
|
|
|
|
|
|
| |
|
Freud LU88R010 10-Inch 60 Tooth ATB Thin Kerf Crosscutting Saw Blade with 5/8-Inch Arbor and PermaShield ...
Freud
Freud
Smooth cuts all the way
This blade produces some exceptionally smooth cuts. I've used it in both my table saw and miter saw, and can't ask for much more. No jagged edges, no saw marks, no tearing. Even with my underpowered, direct drive table saw cuts come out clean.
Is it better than a ...
|
|
|
|
|
|
| |
|
Porter Cable 12810 Riptide 7-1/4-Inch 24 Tooth ATB Thi Kerf Crosscutting and Ripping Saw Blade with 5/8-Inch ...
Porter-Cable
Porter-Cable
Great Blade
When I first put this blade on I had a bunch of treated sleepers to rip to fit the slope of the floor, I thought it was a miracle blade. It sliced through with so little effort. Quite possibly the best 7 1/4" thin kerf saw blade I have used. Your power saw is only ...
|
|
|
|
|
|
| |
|
DeWalt DW3106P5 2 Blade 10-Inch 60 Tooth Crosscutting Saw Blade and 10-Inch 32 Tooth General Purpose Saw ...
DEWALT
DEWALT
Great Deal
I priced these items at stores and what a big savings this was.
|
|
|
|
|
|
| |
|
DeWalt DW7140PT 10-Inch 40 Tooth ATB Ripping and Crosscutting Saw Blade with 5/8-Inch Arbor and Tough Coat ...
DEWALT
DEWALT
Excellent Blade
I have had this blade for about 2 months. It cuts extremely well. I have used it to cross-cut and rip hardwood. When ripping it leaves no saw marks on the wood and leaves a glue ready surface. Crosscuts are clean, no burning and very smooth. I have a number of ...
|
|
|
|
|
|
| |
|
Freud TK406 Avanti 10-Inch 60 Tooth ATB Thin Kerf Crosscutting and Laminate Saw Blade with 5/8-Inch Arbor
Freud
Freud
Freud 10" Finishing Saw Blade
I specified Freud 10" Finishing Blade due to their quality of product and it was not made in Communist China.
I always "Buy American" or it's allies.
|
|
|
|
|
|
| |
|
Freud LU82M010 10-Inch 60 Tooth TCG Crosscutting and Ripping Saw Blade with 5/8-Inch Arbor
Freud
Freud
Impressive Blade
You're not going to believe this, but...... I bought this blade in 2004 on sale to replace the OEM blade that came on my Table Saw. This blade made perfectly smooth cuts on Oak, Cherry and Cedar without so much as a tooth mark: cross cut or rip cut. After about 2 ...
|
|
|
|
|
|
| |
|
DeWalt DW3128 Series 20 12-Inch 80 Tooth ATB Thin Kerf Crosscutting Miter Saw Blade with 1-Inch Arbor
DEWALT
DEWALT
Great Deal
What can I saw (say)?
Name brand, new product at half the cost of "big box" home improvement stores plus it was shipped free for holidays. Blade does a wonderful job on trim cutting. A good buy
|
|
|
|
|
|
| |
|
Bosch CB1280 Construction Series 12-Inch 80 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor
Bosch
Bosch
Good basic blade at a reasonable price
Bought mine from Amazon for $40 when the Irwin blade I had originally bought from Amazon arrived quite warped and I sent it back. The Bosch is a good blade, flat, thin kerf, clean cuts, American made. Not as pretty as some of the more expensive blades, but I don't see ...
|
|
|
|
|
|
| |
|
Freud D1280X Diablo 12-Inch 80 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor
Diablo
Diablo
Devil of a blade
I replaced a Freud 80 T ATB blade with this one not long ago. Great performance and clean cuts with minimal splintering or tear out. Check it out.
|
|
|
|
|
|
| |
|
Freud LU85R010 10-Inch 80 Tooth ATB Ultimate Cut-Off Saw Blade with 5/8-Inch Arbor and PermaShield Coating
Freud
Freud
Great Blade
This blade cuts very smooth with no splintering. I use this on my Delta 12" lazer chop saw for finish work. I had one of these for years and had it resharpened until the teeth could be sharpened no more. I replaced it with a Forest chop saw blade bucause I use Forest ...
|
|
|
|
|
|
| |
|
Irwin 14084 Marathon 12-Inch 100 Tooth ATB Thin Kerf Crosscutting Saw Blade with 1-Inch Arbor
IRWIN
IRWIN
The best blade
This is simply the best blade I have ever used on my Dewalt miter saw. It cuts through hardwood (maple, cherry) like butter and produces a 320 finish. It's able to take hair thick cut without sliding on the work piece. Ideal for trimming. I just ordered the 80T for ...
|
|
|
|
|
|
| |
|
Amana Tool 610504 Combination 10-Inch x 50 Tooth 4ATB+1 Raker 5/8-Inch Bore Saw Blade
Amana Tool
Amana Tool
Application: Designed for ripping and cross-cutting natural woods. Teeth consist of four ATB followed by one square raker. Large gullets in the saw body allow for deeper cuts & improved chip ejection despite short pitch.
|
|
|
|
|
|
