electronics: VISONIC WR2002B WIRELESS TWO-CHANNEL RECEIVER

electronics: VISONIC WR2002B WIRELESS TWO-CHANNEL RECEIVER

electronics:

VISONIC WR2002B WI...

	VISONIC WR2002B WIRELESS TWO-CHANNEL RECEIVER VISONIC VISONIC view larger image
	for more information click here

Add the convenience of wireless security sensors to virtually any hardwired security system! Now you can easily place sensors in out of the way or hard-to-access areas, without having to run new wiring! And what's even better, this universal transmitter works with any sensor that provides either a Normally Open (NO) or Normally Closed (NC) connection, like magnetic contacts, motion sensors, temperature sensors, humidity sensors, and more! Use this transmitter to relay an NO or NC dry contact signal up to 200 to a receiver. In fact, any kind of sensor that has an output that either opens or closes a contact can be connected to this universal transmitter! The transmitter can be set to transmit to only one or more than one of the 4 channels simultaneously upon alarm in any combination. The 4 selectable channels refer to the 4 output contacts on the 4 channel receiver. 256 user selectable security codes provide interference protection and allow several sets of transmitter/receivers to be used together if more than 4 channels are required. When the inputs are disturbed, the transmitter sends a signal for 2-4 seconds then resets for 1 minute, if the inputs remain disturbed, the transmitter continues to transmit for 1-2 secs every minute until inputs return to normal condition. One Shot version has no reset period, it will re-transmit immediately each time inputs are triggered. A separate low battery signal is also transmitted when the 9V battery is getting weak. The LED lights when signal transmissions are being made.

for more information click here

receiver