Kodak EasyShare Printer Dock Series 3 | Kodak Easy Share Printer Dock Series 3

Kodak EasyShare Printer Dock Series 3 | It is great....when it works

camera & photo:

Kodak EasyShare Pr...

	Kodak EasyShare Printer Dock Series 3 Kodak Kodak average customer review:based on 63 reviews view larger image
	for more information click here

Dock your KODAK EASYSHARE Digital Camera, press print, and create great-looking, borderless pictures up to 4"x6" (10x15 cm). IMAGELINK Print System compatible - print directly from IMAGELINK Print System compatible products PictBridge compatible - Use the KODAK Printer Dock with or without a computer Start printing and sharing right out of the box with the included KODAK Color Cartridge and Photo Paper Kit (10 prints) Compatible with KODAK EASYSHARE-ONE and Z Model Digital Cameras and KODAK EASYSHARE Picture Viewer / KODAK EASYSHARE CX/DX6000/7000 and LS600/700 Series Digital Cameras Print technology - Continuous tone thermal dye transfer / Print speed - 90 seconds (120 seconds first print direct from camera)

for more information click here

Kodak Easy Share Printer Dock Series 3

I've had my printer dock for about 4 years and the only reason I keep it is because it also charges the battery to the camera. My main problem is 9 times out of 10, the printer jams or misfeeds. I just tried the rubbing alcohol on the paper roller and it was able to grab the paper. Also, the picture doesn't print out immediately, it pulls the picture back and forth through the paper feed to add each additional layer of color so this constant use of the paper feed may also be the reason for the paper jams. The picture quality is good but I've just reverted back to uploading my pictures and having them printed at local store. This product is not recommended.

for more information click here

It is great....when it works

I got mine a little over a year ago. I thought I could make some saving by buying a package deal of 3 packs of paper and printing cartridge for the price of 2. I used the first pack without any problems. The printer gave me good quality prints...I liked it more than my HP Photosmart printer. Six months passed and I changed my cpu and got Vista in place of XP. The original software did not work. After downloading the updated software, the printer became erratic. Firstly, the computer refused to recognise the printing dock. The firmware update did not seem to have any effect. I found out that I had to do several power-offs of the printer and connecting and reconnecting the usb line before the operating green light came on. It seemed that the printer needed to be connected after the software was activated. Perhaps it was the fault of my computer but this problem did not exist with XP. Secondly, it refused to recognise the new cartridge I put in. The amber light came on and stayed on. Only after several removals of the cartridge and reinsertions did the amber light stay off. Then came the two next disappointments. The cartridges which I bought some time ago left bubbles on the photos because the laminate which is laid onto the print at the final step of printing seemed to have deteriorated in the cartridge. Worse still, the printer would not stop printing the one photograph I wanted. It kept going on and on. So I ended up with about 8 prints all with bubbles or streaks caused by the laminate. Perhaps the shelf life of the cartridges is short. Perhaps I did not store the cartridges in the best environment. But the software and firmware problems seem just too much.

for more information click here