Freud LU87R010 10-Inch 24 Tooth FTG Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and...

Freud LU87R010 10-Inch 24 Tooth FTG Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating | Cuts like buttah

tools & hardware:

Freud LU87R010 10-...

	Freud LU87R010 10-Inch 24 Tooth FTG Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating Freud Freud average customer review:based on 31 reviews view larger image
	for more information click here

highly recommended

This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower.Perma-Shield coating helps this blade pull 1/3 less on the saw which translates into over 38% more cutting power.ideal working range is from 3/4" to 2-3/4" thick. Application: Heavy-Duty Ripping For Underpowered Saws

Amazing Blade for a Portable Table Saw

I bought this blade and a Forrest stabilizer for my Bosch 4000 - cuts are smooth and effortless, and the blade is still sharp after a ton of use. If you have a portable table saw, you can't go wrong with this blade.

for more information click here

Cuts like buttah

This blade is fantastic. I used it to rip down several sheets of Jatoba veneer plywood for a shelving unit I was making, and it worked great. Very smooth edges, no veneer tearout, and very little to no burning.

Easily rips solid Oak

My prior blade (Freud 50T thin-kerf combination) works well for things such as 3/4 plywood, fir, MDF. But I had great difficulty ripping 4/4 Oak... had to really push the boards hard and they even burned some. Although the blade didn't seem to be dull, having it sharpened would likely have improved things. Even so, solid Oak is pretty dense and so I thought it would be good to instead try a blade that was designed for ripping hardwood. This Freud 24T FTG Thin Kerf Ripping blade works wonderfully -- it cuts right through 4/4 Oak without much pressure and with no burning. I don't know how long the teeth will hold an edge, but I'm pleased so far with the performance of this blade.

for more information click here

Excellent product

Freud never lets me down been using these blades for twenty years. I running this on a Bosch 10" table saw ripping mostly 2x and 1x lumber with no problems at all. Highly recommend this blade.

A big improvement for me in ripping hardwoods

I have been remodeling our kitchen and have been fortunate to find a local sawmill that has some white oak that has 6 years of covered air drying. This is hard stock and my other blades left lots of burns and saw marks in the ripping process. This Freud blade has reduced that by about 90% thus easing the finishing prep hand planing or sanding and sealing. As long as your saw is all squared up, this blade should do the trick in getting the rip and tenon cuts you want with a minimum of after cut work. WJP

for more information click here

reviews: page 1, 2, 3, 4, 5, 6, 7

products you might be interested in