book: Designing and Building a Horizontal/Vertical Metal Cutting Bandsaw

book: Designing and Building a Horizontal/Vertical Metal Cutting Bandsaw | Vincent R Gingery

books:

Designing and Buil...

	Designing and Building a Horizontal/Vertical Metal Cutting Bandsaw Vincent R Gingery D.J. Gingery Pub, 2007 - 152 pages view larger image
	for more information click here

Here, you get plans for a Horizontal/Vertical Metal Cutting Bandsaw that you can build from easy-to-find angle iron, flat bar, rod, pipe and easy-to-find hardware. A small amount of welding is required, but most assembly is done with nuts and bolts of various sizes. Although a 9 inch lathe is needed to turn the 8 inch blade wheels, most of the other tools required are found in the average shop. You get such features as: heavy duty construction, a work capacity of 12 inch width with a throat depth of 6 inches . Miter cuts can be made by the adjusting vise. The saw uses a 3/4 blade and will cut in both the horizontal and vertical position. An efficient belt drive eliminate the need for an expensive worm gear. A specially designed locking wheel assembly makes the saw easy to move. And an automatic shut off stops the saw when the cut is complete. This is no simple single-afternoon project. Many assemblies and sub-assemblies are required, although none is exeptionally complex. For all the work involved, the end result is certainly worthwhile. This is a machine you will be proud of. To be sure, if you want a light duty machine that will do nothing more than slice off a length of bar stock, you might consider a cheap import. But if you want a hefty, high-quality machine that will cut large pieces of steel quickly and accurately, this project is for you. And the best of all, you will have built it yourself.

for more information click here

products you might be interested in