| |
|
Parametric Modeling with Autodesk Inventor 2009
Randy Shih
Schroff Development Corporation, 2008
Too much redundancy. Not enough depth
There are some good exercises in this book but, it does not go into enough depth. The book does not address any more than 20% of the application's functionality. The author repeated the same basic instructions for opening a new part file in every exercise wasting ...
|
|
|
|
|
|
| |
|
Parametric Modeling with Pro/ENGINEER Wildfire 3.0
Randy Shih
Schroff Development Corporation, 2006
The primary goal of this book is to introduce the aspects of Solid Modeling and Parametric Modeling. The text is a hands-on, exercise-intensive approach to all the important parametric modeling techniques and concepts. Each Lesson introduces a new set of commands and concepts, building on previous lessons. This text guides you from constructing ...
|
|
|
|
|
|
| |
|
AutoCAD 2002 Tutorial - Second Level: 3D Modeling
Randy H. Shih
Schroff Development Corp, 2001
This book contains a series of ten tutorial style lessons designed to introduce students to AutoCAD 2002's 3D modeling functions.
|
|
|
|
|
|
| |
|
AutoCAD 2008 Tutorial - First Level: 2D Fundamentals
Randy Shih; Jack Zecher
Schroff Development Corporation, 2007
This textbook contains a series of ten tutorial style lessons designed to introduce students to AutoCAD 2008. The new improvements and key enhancements of the software are incorporated into the lessons. Students will learn to use the AutoCAD Heads-up DesignTM interface, which means the students will learn to focus on the design, not on the ...
|
|
|
|
|
|
| |
|
AutoCAD 2009 Tutorial - Second Level: 3D Modeling
Randy Shih
Schroff Development Corporation, 2008
The primary goal of AutoCAD 2009 Tutorial - Second Level: 3D Modeling is to introduce the aspects of Computer Based Three Dimensional Modeling. This text is intended to be used as a training guide for both students and professionals. This book covers AutoCAD 2009 and the chapters proceed in a pedagogical fashion to guide you from constructing ...
|
|
|
|
|
|
| |
|
Parametric Modeling with Pro/ENGINEER Wildfire 4.0
Randy Shih
Schroff Development Corporation, 2008
The primary goal of Parametric Modeling with Pro/ENGINEER Wildfire 4.0 is to introduce the aspects of solid modeling and parametric modeling. The text is a hands-on, exercise-intensive approach to all the important parametric modeling techniques and concepts. This book contains a series of ten tutorial style lessons designed to introduce ...
|
|
|
|
|
|
| |
|
AutoCAD 2009 Tutorial: First Level - 2D Fundamentals (AutoCAD Certification Guide)
Randy Shih, John Granger
Schroff Development Corporation, 2008
AWSOME
I've only made it through half way and it has been 100% better than expected.
|
|
|
|
|
|
| |
|
Parametric Modeling with SolidWorks 2008
Paul Schilling, Randy Shih
Schroff Development Corporation, 2008
Parametric Modeling with SolidWorks 2008
Parametric design? Huh? I was struggling trying to understand and apply the concept with SolidWorks 2007, then, of course SolidWorks 2008 was released. I came across this book and ordered it immediately, and I'm glad I did. A good overview of the parametric design ...
|
|
|
|
|
|
| |
|
Parametric Modeling with SolidWorks 2007
Paul Schilling, Randy Shih
Schroff Development Corporation, 2007
This book contains a series of twelve tutorial style lessons designed to introduce SolidWorks 2007, solid modeling and parametric modeling techniques and concepts. The lessons guide the user from constructing basic shapes to building intelligent solid models and assemblies and creating multi-view drawings. Table of Contents 1. Getting ...
|
|
|
|
|
|
| |
|
Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2009
Randy Shih
Schroff Development Corporation, 2008
Principles and Practices: An Integrated Approach to Engineering Graphics and AutoCAD 2009 combines an introduction to AutoCAD 2009 with a comprehensive coverage of engineering graphics principles. By adopting this textbook, you will no longer need to adopt separate CAD and engineering graphics books for your course. Not only will this unified ...
|
|
|
|
|
|
| |
|
AutoCAD 2007 Tutorial, First Level: 2D Fundamentals
Jack Zecher Randy H. Shih
Schroff Development Corporation, 2006
This textbook contains a series of ten tutorial style lessons designed to introduce students to AutoCAD 2007. The new improvements and key enhancements of the software are incorporated into the lessons. Students will learn to use the AutoCAD Heads-up DesignTM interface, which means the students will learn to focus on the design, not on the ...
|
|
|
|
|
|
| |
|
Parametric Modeling with Autodesk Inventor 2008
Randy Shih
Schroff Development Corporation, 2007
Useful Introduction to Parts Modeling
This book concentrates on modeling parts intended to be cast or machined. There is no coverage of sheet metal or weldment parts, and only Chapter 12 (the last) covers assmblies. The first chapter introduces the reader to the Inventor user interface. The remaining ...
|
|
|
|
|
|
| |
|
AutoCAD 2004: Second Level: 3D Modeling
Randy H. Shih
Schroff Development Corporation, 2003
The primary goal of AutoCAD 2004 Tutorial: 3D Modeling is to introduce the aspects of Computer Three Dimensional Modeling. This book contains a series of ten tutorial style lessons designed to introduce users to AutoCAD 2004's 3D modeling functions. The new improvements and enhancements of the software are incorporated into the tutorial. The ...
|
|
|
|
|
|
| |
|
AutoCAD 2004: First Level: 2D Fundamentals
Randy H. Shih, Jack Zecher
Schroff Development Corporation, 2003
This textbook contains a series of ten tutorial style lessons designed to introduce you to AutoCAD 2004. The new improvements and key enhancements of the software are incorporated into the lessons. The book will show you the new AutoCAD Heads-up DesignTM interface, which means the user will learn to focus on the design, not on the keyboard. The ...
|
|
|
|
|
|
| |
|
Parametric Modeling with Inventor 10
Randy Shih
Schroff Development Corporation, 2005
Parametric Modeling with Autodesk Inventor R10 contains a series of ten tutorial style lessons designed to introduce Autodesk Inventor, solid modeling, and parametric modeling. It uses a hands-on, exercise-intensive approach to all the import parametric modeling techniques and concepts. The lessons guide the user from constructing basic ...
|
|
|
|
|
|
